Products

KYODO YUSHI TMO150 20 L gear lubricant container reference

KYODO YUSHI TMO150 20L Synthetic PAG Gear Oil

EMAIL SALES

Manufacturer data reviewed

TMO150 20L — synthetic PAG gear oil

Lubricates compact gears with low-friction performance. Confirm gear materials and oil compatibility first.

KYODO YUSHIindustrial gear lubricantsExact-model review

Sales managerTiffany Guan

Mobile / WhatsApp+86 18030235313

Emailsales2@mooreplc.com

TMO150 20L verified profile

ManufacturerKYODO YUSHI

Exact modelTMO150 20L

Product typesynthetic PAG gear oil

Product familyindustrial gear lubricants

Primary roleCompact gear lubrication

Interface contextSynthetic PAG gear oil

Brand:
Others
Item NO.:
TMO150 20L
Goods Stock:
1
Part Number:
TMO150 20L
Description:
KYODO YUSHI TMO150 synthetic PAG gear oil for high-performance compact gears; requested 20 L package.

Inquiry now

TMO150 20L configuration inquiry

Get a precise quote for TMO150 20L

Email Sales

Sales managerTiffany Guan

WhatsApp+86 18030235313

Emailsales2@mooreplc.com

TMO150 20L official identification

Lubricates high-performance compact gears with documented low-friction and anti-wear performance. Confirm gear material, existing lubricant, seals and paint system before filling or changing over.

Installed roleLubricates high-performance compact gears with documented low-friction and anti-wear performance

Interface contextConfirm gear material, existing lubricant, seals and paint system before filling or changing over

Exact-code controlUse TMO150 20L without suffix substitution.

Evidence basisManufacturer-issued TMO150 Product Data sheet; Kyodo Yushi official company and SDS resources

Engineering and installation checks

Confirm that the gear set is not made from aluminum or an aluminum alloy; TMO150 is not recommended for those materials.
Before changing from another lubricant, drain the existing oil and flush the machine at no load with a minimum quantity of TMO150.
Drain the flushing charge while warm and replace seals previously exposed to mineral oil when required for the best changeover result.

Official product data

TMO150 20L key specifications

Product identity	TMO150
ISO viscosity grade	ISO VG 150
Kinematic viscosity at 40 °C	150.4 mm²/s
Kinematic viscosity at 100 °C	23.7 mm²/s
Viscosity index	189
Flash point (COC)	302 °C
Pour point	−35 °C
Density at 15 °C	1.07 g/cm³
FZG failure load stage	>12

Source: Manufacturer-issued TMO150 Product Data sheet; Kyodo Yushi official company and SDS resources.

Pre-order check 01

Installation environment

Verify the gearbox, current lubricant and material compatibility before opening or filling the system.

Confirm that the gear set is not made from aluminum or an aluminum alloy; TMO150 is not recommended for those materials.
Before changing from another lubricant, drain the existing oil and flush the machine at no load with a minimum quantity of TMO150.
Drain the flushing charge while warm and replace seals previously exposed to mineral oil when required for the best changeover result.
Refill only after the oil system is clean and free from contamination, then inspect the oil condition again after several days of operation.

Record the original lubricant, flush quantity, warm-drain completion and final fill identification.

Pre-order check 02

Compatibility confirmation

Match every item to the gearbox materials and the existing lubrication system.

Gear material: Use for the documented compact-gear duty; do not select it for aluminum or aluminum-alloy gears.
Lubricant mixing: TMO150 is not mixable with mineral oils or other synthetic oils.
PAG changeover: TMO150 is also not miscible with other polyalkylene-glycol lubricants; drain and refill rather than topping up.
Seal materials: Nitrile and Viton seals are compatible; Viton is preferred for higher-temperature applications.
Paint system: Use a high-quality epoxy coating because polyalkylene glycol can attack some conventional paints.

Final selection: confirm TMO150 and the 20 L package, then approve the material and changeover checks before order release.

Verified Nordwel references