other
Products
KC3030X1-BA1 Four-Port H1 Plus Fieldbus Card
KC3030X1-BA1 Four-Port H1 Plus Fieldbus Card
KC3030X1-BA1 Four-Port H1 Plus Fieldbus Card

Emerson KC3030X1-BA1 Four-Port H1 Plus Fieldbus Card

EMAIL SALES
Emerson official data reviewed
KC3030X1-BA1 — Four-Port H1 Plus Fieldbus Card

KC3030X1-BA1 is the manufacturer-identified four-port h1 plus fieldbus card with the documented electrical boundary shown below.

DeltaV M-series I/OFour-segment H1 fieldbus interfaceExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerEmerson
Documented familyDeltaV M-series I/O
Product formFour-Port H1 Plus Fieldbus Card
Primary functionFour-segment H1 fieldbus interface
Exact designationKC3030X1-BA1
Official instruction IDATEX154
Local bus input12 V DC at 300 mA
Field-circuit limit9–32 V DC at 12 mA per port
  • Brand:

    Emerson
  • Item NO.:

    KC3030X1-BA1
  • Goods Stock:

    1
  • Part Number:

    KC3030X1-BA1
  • Description:

    KC3030X1-BA1 is the manufacturer-identified four-port h1 plus fieldbus card with the documented electrical boundary shown below.
KC3030X1-BA1 configuration inquiry

Get a precise quote for KC3030X1-BA1

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

KC3030X1-BA1 official identification

KC3030X1-BA1 is the manufacturer-identified four-port h1 plus fieldbus card with the documented electrical boundary shown below.

System roleFour-segment H1 fieldbus interface
Connection boundaryFour H1 ports; 9–32 V DC fieldbus segments
Selection focusMatch ATEX154, 9–32 V DC at 12 mA per port and the installed carrier position before release.
Release evidenceKC3030X1-BA1 marking, keyed-position record, field-circuit check and point-by-point functional result

Engineering and installation checks

  • undefined
  • Verify the KC3030X1-BA1 marking and keyed carrier position before insertion.
  • Manufacturer verification basis: Emerson KC3030X1-BA1 official ATEX installation instructions.
Official product data

KC3030X1-BA1 key specifications

Exact designation KC3030X1-BA1
Manufacturer description Four-Port H1 Plus Fieldbus Card
Official instruction ID ATEX154
Local bus input 12 V DC at 300 mA
Field-circuit limit 9–32 V DC at 12 mA per port
Ambient temperature −40 to +70 °C
Humidity 5–95%, non-condensing
Airborne contaminants ISA-S71.04 G3
Ingress protection IP20

Source: Emerson KC3030X1-BA1 official ATEX installation instructions.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of KC3030X1-BA1.

  • Verify the KC3030X1-BA1 marking and keyed carrier position before insertion.
  • Isolate the field circuit and keep it within 9–32 V DC at 12 mA per port.
  • Maintain the published −40 to +70 °C ambient and IP20 cabinet boundary.
  • Exercise every assigned channel and retain the observed state in the commissioning record.
Record the as-found condition and the final kc3030x1-ba1 marking, keyed-position record, field-circuit check and point-by-point functional result
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for KC3030X1-BA1 before purchase approval.

Ordering identity
KC3030X1-BA1
Manufacturer description
Four-Port H1 Plus Fieldbus Card
Carrier position
Match installed keying
Electrical boundary
9–32 V DC at 12 mA per port
Environmental envelope
−40 to +70 °C; IP20
Final selection: Use only the values published for KC3030X1-BA1 in Emerson KC3030X1-BA1 official ATEX installation instructions; site suitability remains an engineering decision.
Recommended model families

More Emerson models

Emerson verified models 01Emerson CE4002S1T2B6Emerson CE4002S1T2B8Emerson CE4003S2B10

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 02Emerson CE4003S2B9Emerson CE4031S2T2B6Emerson CE4032S1T2B8

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 03Emerson CE4033S2B10Emerson CE4036P2Emerson CS6002

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 04Emerson 333UEmerson CE4001S2T1B1Emerson CE4001S2T2B7

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01ABB CI542-DPABB CI582-CNABB CI590-CS31-HA

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02ABB CI592-CS31ABB CM5640-2ETHABB CM579-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03ABB CM582-DPABB CM588-CNABB CM589-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04ABB CM597-ETHABB CM598-CNABB DC562

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05ABB DI572ABB DO526ABB DO571

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06ABB AC522ABB AI563ABB AO522

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07ABB AO562ABB AO568ABB CD522

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08ABB CI504-PNIOABB CI506-PNIOABB CI541-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

KC3030X1-BA1 Order Guide

Use the complete Emerson designation and installed hardware record for engineering review.
1Ordering identityKC3030X1-BA1
2Official evidenceEmerson KC3030X1-BA1 official ATEX installation instructions
3Installation surveyIsolate the field circuit and keep it within 9–32 V DC at 12 mA per port.
4Compatibility gateKC3030X1-BA1
5Commissioning recordKC3030X1-BA1 marking, keyed-position record, field-circuit check and point-by-point functional result
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact KC3030X1-BA1 source record named on this page.
Interface reviewFour H1 ports; 9–32 V DC fieldbus segments
Receiving checkMatch ATEX154, 9–32 V DC at 12 mA per port and the installed carrier position before release.
Release packageKC3030X1-BA1 marking, keyed-position record, field-circuit check and point-by-point functional result

KC3030X1-BA1 FAQ

How should engineers verify local bus input before fitting KC3030X1-BA1 Four-Port H1 Plus Fieldbus Card during H1 segment energization?

Use 12 V DC at 300 mA as the controlled local bus input value in the DeltaV M-series I/O review. For four-segment fieldbus connection, verify the KC3030X1-BA1 marking and keyed carrier position before insertion. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement. Record checkpoint 1 in the H1 segment energization package.

What installation decision is controlled by humidity on KC3030X1-BA1 Four-Port H1 Plus Fieldbus Card during H1 segment energization?

Humidity is published as 5–95%, non-condensing for the DeltaV M-series I/O. For h1 instrument integration, isolate the field circuit and keep it within 9–32 V DC at 12 mA per port. Log the comparison against the controlled parts list before the item enters the cabinet. Record checkpoint 2 in the H1 segment energization package.

What commissioning check confirms the documented ordering identity for KC3030X1-BA1 Four-Port H1 Plus Fieldbus Card during H1 segment energization?

The official KC3030X1-BA1 record gives ordering identity as KC3030X1-BA1 for its four-port h1 plus fieldbus card function. For segmented process network, maintain the published −40 to +70 °C ambient and IP20 cabinet boundary. Check the mating device, protective hardware and configured function before energization. Record checkpoint 3 in the H1 segment energization package.

At which review gate should KC3030X1-BA1 Four-Port H1 Plus Fieldbus Card electrical boundary be challenged during H1 segment energization?

For this four-segment h1 fieldbus interface selection, electrical boundary is 9–32 V DC at 12 mA per port. For fieldbus card replacement, exercise every assigned channel and retain the observed state in the commissioning record. The purchase description must retain units, polarity, wiring form and option wording exactly where they are published. Record checkpoint 4 in the H1 segment energization package.

Which drawing or schedule should carry the KC3030X1-BA1 Four-Port H1 Plus Fieldbus Card manufacturer description record during H1 segment energization?

Use Four-Port H1 Plus Fieldbus Card as the controlled manufacturer description value in the DeltaV M-series I/O review. For four-segment fieldbus connection, verify the KC3030X1-BA1 marking and keyed carrier position before insertion. Use a calibrated observation where measurement is possible and attach the result to receiving inspection. Record checkpoint 5 in the H1 segment energization package.

Which companion item must agree with field-circuit limit for KC3030X1-BA1 Four-Port H1 Plus Fieldbus Card during H1 segment energization?

Field-circuit limit is published as 9–32 V DC at 12 mA per port for the DeltaV M-series I/O. For h1 instrument integration, isolate the field circuit and keep it within 9–32 V DC at 12 mA per port. Record the complete marking in focus; cropped labels are not sufficient for exact-order approval. Record checkpoint 6 in the H1 segment energization package.

How should a discrepancy in airborne contaminants be closed for KC3030X1-BA1 Four-Port H1 Plus Fieldbus Card during H1 segment energization?

The official KC3030X1-BA1 record gives airborne contaminants as ISA-S71.04 G3 for its four-port h1 plus fieldbus card function. For segmented process network, maintain the published −40 to +70 °C ambient and IP20 cabinet boundary. Test at a safe initial condition, then progress to the operating point defined by the approved procedure. Record checkpoint 7 in the H1 segment energization package.

What receiving evidence is required for the manufacturer description stated for KC3030X1-BA1 Four-Port H1 Plus Fieldbus Card during H1 segment energization?

For this four-segment h1 fieldbus interface selection, manufacturer description is Four-Port H1 Plus Fieldbus Card. For fieldbus card replacement, exercise every assigned channel and retain the observed state in the commissioning record. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim. Record checkpoint 8 in the H1 segment energization package.

How is environmental envelope separated from site-specific assumptions for KC3030X1-BA1 Four-Port H1 Plus Fieldbus Card during H1 segment energization?

Use −40 to +70 °C; IP20 as the controlled environmental envelope value in the DeltaV M-series I/O review. For four-segment fieldbus connection, verify the KC3030X1-BA1 marking and keyed carrier position before insertion. Release is appropriate only when the manufacturer value and the project requirement agree. Record checkpoint 9 in the H1 segment energization package.

How should official instruction id be written in the purchase record for KC3030X1-BA1 Four-Port H1 Plus Fieldbus Card during H1 segment energization?

Official instruction ID is published as ATEX154 for the DeltaV M-series I/O. For h1 instrument integration, isolate the field circuit and keep it within 9–32 V DC at 12 mA per port. A substitution review must close functional, mechanical, electrical and environmental differences independently. Record checkpoint 10 in the H1 segment energization package.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
DeltaV M-series I/O application review

KC3030X1-BA1 Applications

These contexts use the manufacturer-documented function of KC3030X1-BA1; each requires a separate site-fit decision.

Application contexts

01 · Four-segment fieldbus connectionApply the documented four-segment h1 fieldbus interface only after confirming ordering identity as KC3030X1-BA1.
02 · H1 instrument integrationApply the documented four-segment h1 fieldbus interface only after confirming manufacturer description as Four-Port H1 Plus Fieldbus Card.
03 · Segmented process networkApply the documented four-segment h1 fieldbus interface only after confirming carrier position as Match installed keying.
04 · Fieldbus card replacementApply the documented four-segment h1 fieldbus interface only after confirming electrical boundary as 9–32 V DC at 12 mA per port.

Why choose Nordwel

Traceable identityKC3030X1-BA1 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to four-segment h1 fieldbus interface, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain KC3030X1-BA1, Four H1 ports; 9–32 V DC fieldbus segments, and the approved site record as three independent checks.
Need help matching this Emerson configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp