other
Products
KJ1710X1-BA1 Single-Port Fiber Switch
KJ1710X1-BA1 Single-Port Fiber Switch
KJ1710X1-BA1 Single-Port Fiber Switch

Emerson KJ1710X1-BA1 Single-Port Fiber Switch

EMAIL SALES
Emerson official data reviewed
KJ1710X1-BA1 — Single-Port Fiber Switch

KJ1710X1-BA1 is the manufacturer-identified single-port fiber switch with the documented electrical boundary shown below.

DeltaV Network HardwareSingle-port optical network switchingExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerEmerson
Documented familyDeltaV Network Hardware
Product formSingle-Port Fiber Switch
Primary functionSingle-port optical network switching
Exact designationKJ1710X1-BA1
Official instruction IDATEX exact-model instructions
Local bus input19.2–28.8 V DC at 250 mA
Field-circuit limitSingle optical-network port
  • Brand:

    Emerson
  • Item NO.:

    KJ1710X1-BA1
  • Goods Stock:

    1
  • Part Number:

    KJ1710X1-BA1
  • Description:

    KJ1710X1-BA1 is the manufacturer-identified single-port fiber switch with the documented electrical boundary shown below.
KJ1710X1-BA1 configuration inquiry

Get a precise quote for KJ1710X1-BA1

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

KJ1710X1-BA1 official identification

KJ1710X1-BA1 is the manufacturer-identified single-port fiber switch with the documented electrical boundary shown below.

System roleSingle-port optical network switching
Connection boundaryOne fiber communication port
Selection focusMatch ATEX exact-model instructions, Single optical-network port and the installed carrier position before release.
Release evidenceKJ1710X1-BA1 marking, keyed-position record, field-circuit check and point-by-point functional result

Engineering and installation checks

  • undefined
  • Verify the KJ1710X1-BA1 marking and keyed carrier position before insertion.
  • Manufacturer verification basis: Emerson KJ1710X1-BA1 official ATEX installation instructions.
Official product data

KJ1710X1-BA1 key specifications

Exact designation KJ1710X1-BA1
Manufacturer description Single-Port Fiber Switch
Official instruction ID ATEX exact-model instructions
Local bus input 19.2–28.8 V DC at 250 mA
Field-circuit limit Single optical-network port
Ambient temperature −40 to +70 °C
Humidity 5–95%, non-condensing
Airborne contaminants ISA-S71.04 G3
Ingress protection IP20

Source: Emerson KJ1710X1-BA1 official ATEX installation instructions.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of KJ1710X1-BA1.

  • Verify the KJ1710X1-BA1 marking and keyed carrier position before insertion.
  • Isolate the field circuit and keep it within Single optical-network port.
  • Maintain the published −40 to +70 °C ambient and IP20 cabinet boundary.
  • Exercise every assigned channel and retain the observed state in the commissioning record.
Record the as-found condition and the final kj1710x1-ba1 marking, keyed-position record, field-circuit check and point-by-point functional result
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for KJ1710X1-BA1 before purchase approval.

Ordering identity
KJ1710X1-BA1
Manufacturer description
Single-Port Fiber Switch
Carrier position
Match installed keying
Electrical boundary
Single optical-network port
Environmental envelope
−40 to +70 °C; IP20
Final selection: Use only the values published for KJ1710X1-BA1 in Emerson KJ1710X1-BA1 official ATEX installation instructions; site suitability remains an engineering decision.
Recommended model families

More Emerson models

Emerson verified models 01Emerson CE4003S2B9Emerson CE4031S2T2B6Emerson CE4032S1T2B8

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 02Emerson CE4033S2B10Emerson CE4036P2Emerson CS6002

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 03Emerson 333UEmerson CE4001S2T1B1Emerson CE4001S2T2B7

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 04Emerson CE4002S1T2B6Emerson CE4002S1T2B8Emerson CE4003S2B10

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01ABB CM597-ETHABB CM598-CNABB DC562

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02ABB DI572ABB DO526ABB DO571

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03ABB AC522ABB AI563ABB AO522

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04ABB AO562ABB AO568ABB CD522

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05ABB CI504-PNIOABB CI506-PNIOABB CI541-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06ABB CI542-DPABB CI582-CNABB CI590-CS31-HA

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07ABB CI592-CS31ABB CM5640-2ETHABB CM579-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08ABB CM582-DPABB CM588-CNABB CM589-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

KJ1710X1-BA1 Order Guide

Use the complete Emerson designation and installed hardware record for engineering review.
1Ordering identityKJ1710X1-BA1
2Official evidenceEmerson KJ1710X1-BA1 official ATEX installation instructions
3Installation surveyIsolate the field circuit and keep it within Single optical-network port.
4Compatibility gateKJ1710X1-BA1
5Commissioning recordKJ1710X1-BA1 marking, keyed-position record, field-circuit check and point-by-point functional result
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact KJ1710X1-BA1 source record named on this page.
Interface reviewOne fiber communication port
Receiving checkMatch ATEX exact-model instructions, Single optical-network port and the installed carrier position before release.
Release packageKJ1710X1-BA1 marking, keyed-position record, field-circuit check and point-by-point functional result

KJ1710X1-BA1 FAQ

What receiving evidence is required for the humidity stated for KJ1710X1-BA1 Single-Port Fiber Switch during fiber path restoration?

For this single-port optical network switching selection, humidity is 5–95%, non-condensing. For cabinet fiber transition, verify the KJ1710X1-BA1 marking and keyed carrier position before insertion. Trace the value to the cited manufacturer source and the as-installed drawing as separate evidence items. Record checkpoint 1 in the fiber path restoration package.

How is ordering identity separated from site-specific assumptions for KJ1710X1-BA1 Single-Port Fiber Switch during fiber path restoration?

Use KJ1710X1-BA1 as the controlled ordering identity value in the DeltaV Network Hardware review. For single-path optical extension, isolate the field circuit and keep it within Single optical-network port. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement. Record checkpoint 2 in the fiber path restoration package.

How should electrical boundary be written in the purchase record for KJ1710X1-BA1 Single-Port Fiber Switch during fiber path restoration?

Electrical boundary is published as Single optical-network port for the DeltaV Network Hardware. For network media conversion, maintain the published −40 to +70 °C ambient and IP20 cabinet boundary. Log the comparison against the controlled parts list before the item enters the cabinet. Record checkpoint 3 in the fiber path restoration package.

What field observation validates manufacturer description for KJ1710X1-BA1 Single-Port Fiber Switch during fiber path restoration?

The official KJ1710X1-BA1 record gives manufacturer description as Single-Port Fiber Switch for its single-port fiber switch function. For fiber switch replacement, exercise every assigned channel and retain the observed state in the commissioning record. Check the mating device, protective hardware and configured function before energization. Record checkpoint 4 in the fiber path restoration package.

What fault could result from misreading field-circuit limit on KJ1710X1-BA1 Single-Port Fiber Switch during fiber path restoration?

For this single-port optical network switching selection, field-circuit limit is Single optical-network port. For cabinet fiber transition, verify the KJ1710X1-BA1 marking and keyed carrier position before insertion. The purchase description must retain units, polarity, wiring form and option wording exactly where they are published. Record checkpoint 5 in the fiber path restoration package.

What photograph or measurement proves airborne contaminants on received KJ1710X1-BA1 Single-Port Fiber Switch during fiber path restoration?

Use ISA-S71.04 G3 as the controlled airborne contaminants value in the DeltaV Network Hardware review. For single-path optical extension, isolate the field circuit and keep it within Single optical-network port. Use a calibrated observation where measurement is possible and attach the result to receiving inspection. Record checkpoint 6 in the fiber path restoration package.

Which manufacturer description value identifies the reviewed KJ1710X1-BA1 Single-Port Fiber Switch configuration during fiber path restoration?

Manufacturer description is published as Single-Port Fiber Switch for the DeltaV Network Hardware. For network media conversion, maintain the published −40 to +70 °C ambient and IP20 cabinet boundary. Record the complete marking in focus; cropped labels are not sufficient for exact-order approval. Record checkpoint 7 in the fiber path restoration package.

Why does environmental envelope matter when selecting KJ1710X1-BA1 Single-Port Fiber Switch during fiber path restoration?

The official KJ1710X1-BA1 record gives environmental envelope as −40 to +70 °C; IP20 for its single-port fiber switch function. For fiber switch replacement, exercise every assigned channel and retain the observed state in the commissioning record. Test at a safe initial condition, then progress to the operating point defined by the approved procedure. Record checkpoint 8 in the fiber path restoration package.

Which mismatch involving official instruction id should stop approval of KJ1710X1-BA1 Single-Port Fiber Switch during fiber path restoration?

For this single-port optical network switching selection, official instruction id is ATEX exact-model instructions. For cabinet fiber transition, verify the KJ1710X1-BA1 marking and keyed carrier position before insertion. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim. Record checkpoint 9 in the fiber path restoration package.

What maintenance record preserves the ambient temperature evidence for KJ1710X1-BA1 Single-Port Fiber Switch during fiber path restoration?

Use −40 to +70 °C as the controlled ambient temperature value in the DeltaV Network Hardware review. For single-path optical extension, isolate the field circuit and keep it within Single optical-network port. Release is appropriate only when the manufacturer value and the project requirement agree. Record checkpoint 10 in the fiber path restoration package.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
DeltaV Network Hardware application review

KJ1710X1-BA1 Applications

These contexts use the manufacturer-documented function of KJ1710X1-BA1; each requires a separate site-fit decision.

Application contexts

01 · Cabinet fiber transitionApply the documented single-port optical network switching only after confirming ordering identity as KJ1710X1-BA1.
02 · Single-path optical extensionApply the documented single-port optical network switching only after confirming manufacturer description as Single-Port Fiber Switch.
03 · Network media conversionApply the documented single-port optical network switching only after confirming carrier position as Match installed keying.
04 · Fiber switch replacementApply the documented single-port optical network switching only after confirming electrical boundary as Single optical-network port.

Why choose Nordwel

Traceable identityKJ1710X1-BA1 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to single-port optical network switching, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain KJ1710X1-BA1, One fiber communication port, and the approved site record as three independent checks.
Need help matching this Emerson configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp