other
Products
IC200ALG322 VersaMax Four-Channel Analog Output Module
IC200ALG322 VersaMax Four-Channel Analog Output Module
IC200ALG322 VersaMax Four-Channel Analog Output Module

GE IC200ALG322 VersaMax Four-Channel Analog Output Module

EMAIL SALES
GE official data reviewed
IC200ALG322 — VersaMax Four-Channel Analog Output Module

A VersaMax analog output module providing four 12-bit bipolar voltage channels over a ±10 V output range.

VersaMax modular I/OFour-channel bipolar voltage command outputExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Product familyVersaMax modular I/O
Exact modelIC200ALG322
Verified functionFour-channel bipolar voltage command output
Interface boundaryFour 12-bit analog outputs with ±10 V range
Signal directionAnalog output
Selection basisConfirm four-channel capacity, bipolar voltage range, output reference, carrier type and receiving-device impedance.
  • Brand:

    General Electric
  • Item NO.:

    IC200ALG322
  • Goods Stock:

    1
  • Part Number:

    IC200ALG322
  • Description:

    A VersaMax analog output module providing four 12-bit bipolar voltage channels over a ±10 V output range.
IC200ALG322 configuration inquiry

Get a precise quote for IC200ALG322

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IC200ALG322 official identification

A VersaMax analog output module providing four 12-bit bipolar voltage channels over a ±10 V output range.

System responsibilityFour-channel bipolar voltage command output
Connection envelopeFour 12-bit analog outputs with ±10 V range
Procurement decisionConfirm four-channel capacity, bipolar voltage range, output reference, carrier type and receiving-device impedance.
Acceptance recordExact catalog label, carrier identity, channel map, zero and span measurements, polarity test and load response

Engineering and installation checks

  • The controlling identity is IC200ALG322; every character remains part of the order reference.
  • Record every channel destination and its expected polarity before removing the module.
  • Published facts are limited to Emerson official VersaMax Modular I/O and Control data sheet.
Official product data

IC200ALG322 key specifications

Catalog number IC200ALG322
Module family VersaMax modular I/O
Signal direction Analog output
Channel count 4
Resolution 12 bit
Output range ±10 V
Output type Bipolar voltage
Carrier requirement Compatible VersaMax I/O carrier
Commissioning focus Zero, span and polarity per channel
Manufacturer record Official modular I/O data sheet

Source: Emerson official VersaMax Modular I/O and Control data sheet.

Pre-order check 01

Installation environment

Prepare the versamax four-channel analog output module by recording the installed connections, settings and complete nameplate.

  • Record every channel destination and its expected polarity before removing the module.
  • Confirm the module carrier and terminal assignments from the installed station.
  • Apply a controlled command and measure zero, positive span and negative span on each channel.
  • Reconnect loads only after their input range and reference are verified.
Close the work with exact catalog label, carrier identity, channel map, zero and span measurements, polarity test and load response.
Pre-order check 02

Compatibility confirmation

Approve IC200ALG322 only when its documented function and every listed boundary agree with the installed design.

Exact identity
IC200ALG322
Signal requirement
Four ±10 V outputs
Resolution
12-bit command conversion
Mechanical host
Compatible VersaMax carrier
Receiving equipment
Bipolar-voltage input with approved reference
Final selection: Use only the values published for IC200ALG322 in Emerson official VersaMax Modular I/O and Control data sheet; site suitability remains an engineering decision.
Recommended model families

Verified Cross-Brand Models

Tiffany verified models 01ABB DO572ABB PM5032-R-ETHABB PM5072-T-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02ABB PM564-RP-ACYokogawa ATSA3S-0Yokogawa ATSS3D-0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03Siemens 6ES7357-4AH01-0AE0Siemens 6ES7400-2JA10-0AA1Siemens 6ES7414-2XG02-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04Siemens 6ES7416-2XL01-0AB0Siemens 6ES7425-2AD00-0AA0Siemens 6ES7515-2AN03-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01ABB CM5640-2ETHABB CM582-DPABB CM588-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02ABB CM589-PNIOABB CM598-CNABB DC562

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03ABB DO526Siemens 6ES7517-3UP00-0AB0Siemens 6ES7518-4UP00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04B&R 8BVI0330HWS0.000-1B&R X20IF2181-2B&R 8B0C0320HW00.000-1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05Siemens 6GK1161-6AA02Siemens 6SL3120-1TE15-0AA4Siemens 6SL3040-0LA00-0AA1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06Siemens 6ES7157-0AA82-0XA0Siemens 6ES7407-0RA01-0AA0Siemens 6ES5305-7LA11

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07B&R 8BVI0220HWD0.000-1B&R X20AP3111B&R X20CSL8100

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08Siemens 6ES7551-1AB00-0AB0Siemens 6ES7553-1AA00-0AB0Siemens 6ED1052-1MD08-0BA2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

IC200ALG322 Order Guide

Use the complete GE designation and installed hardware record for engineering review.
1Ordering identityIC200ALG322
2Manufacturer evidenceEmerson official VersaMax Modular I/O and Control data sheet
3Installed-condition captureConfirm the module carrier and terminal assignments from the installed station.
4Compatibility gateExact identity: IC200ALG322
5Commissioning proofExact catalog label, carrier identity, channel map, zero and span measurements, polarity test and load response
6Release decisionConfirm four-channel capacity, bipolar voltage range, output reference, carrier type and receiving-device impedance.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Support for exact-code review, sourcing, receiving and controlled release of IC200ALG322.

Support scope

Module family evidenceVersaMax modular I/O is checked against the received unit.
Signal requirement reviewFour ±10 V outputs
Signal direction checkpointAnalog output
Acceptance packageExact catalog label, carrier identity, channel map, zero and span measurements, polarity test and load response

IC200ALG322 FAQ

Which mismatch involving commissioning focus should stop approval of IC200ALG322 VersaMax Four-Channel Analog Output Module?

For this four-channel bipolar voltage command output selection, commissioning focus is Zero, span and polarity per channel. For bidirectional actuator command, record every channel destination and its expected polarity before removing the module. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification.

What maintenance record preserves the signal requirement evidence for IC200ALG322 VersaMax Four-Channel Analog Output Module?

Use Four ±10 V outputs as the controlled signal requirement value in the VersaMax modular I/O review. For valve-position reference, confirm the module carrier and terminal assignments from the installed station. The commissioning sheet should name the instrument, method, acceptance limit and approving person.

How does receiving equipment limit a proposed IC200ALG322 VersaMax Four-Channel Analog Output Module substitute?

Receiving equipment is published as Bipolar-voltage input with approved reference for the VersaMax modular I/O. For laboratory setpoint generation, apply a controlled command and measure zero, positive span and negative span on each channel. Use the value as a selection boundary, not as a prediction of site performance.

How can a technician test IC200ALG322 VersaMax Four-Channel Analog Output Module without exceeding the stated signal direction?

The official IC200ALG322 record gives signal direction as Analog output for its versamax four-channel analog output module function. For four-loop voltage output replacement, reconnect loads only after their input range and reference are verified. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics.

When can the IC200ALG322 VersaMax Four-Channel Analog Output Module output range entry be released for quotation?

For this four-channel bipolar voltage command output selection, output range is ±10 V. For bidirectional actuator command, record every channel destination and its expected polarity before removing the module. Trace the value to the cited manufacturer source and the as-installed drawing as separate evidence items.

How should engineers verify commissioning focus before fitting IC200ALG322 VersaMax Four-Channel Analog Output Module?

Use Zero, span and polarity per channel as the controlled commissioning focus value in the VersaMax modular I/O review. For valve-position reference, confirm the module carrier and terminal assignments from the installed station. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement.

What installation decision is controlled by signal requirement on IC200ALG322 VersaMax Four-Channel Analog Output Module?

Signal requirement is published as Four ±10 V outputs for the VersaMax modular I/O. For laboratory setpoint generation, apply a controlled command and measure zero, positive span and negative span on each channel. Log the comparison against the controlled parts list before the item enters the cabinet.

What commissioning check confirms the documented receiving equipment for IC200ALG322 VersaMax Four-Channel Analog Output Module?

The official IC200ALG322 record gives receiving equipment as Bipolar-voltage input with approved reference for its versamax four-channel analog output module function. For four-loop voltage output replacement, reconnect loads only after their input range and reference are verified. Check the mating device, protective hardware and configured function before energization.

At which review gate should IC200ALG322 VersaMax Four-Channel Analog Output Module signal direction be challenged?

For this four-channel bipolar voltage command output selection, signal direction is Analog output. For bidirectional actuator command, record every channel destination and its expected polarity before removing the module. The purchase description must retain units, polarity, wiring form and option wording exactly where they are published.

Which drawing or schedule should carry the IC200ALG322 VersaMax Four-Channel Analog Output Module output range record?

Use ±10 V as the controlled output range value in the VersaMax modular I/O review. For valve-position reference, confirm the module carrier and terminal assignments from the installed station. Use a calibrated observation where measurement is possible and attach the result to receiving inspection.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
VersaMax modular I/O application review

IC200ALG322 Applications

These contexts use IC200ALG322 for four-channel bipolar voltage command output; each requires its own installed-system evidence.

Application contexts

01 · Bidirectional actuator commandApply the documented four-channel bipolar voltage command output only after confirming exact identity as IC200ALG322.
02 · Valve-position referenceApply the documented four-channel bipolar voltage command output only after confirming signal requirement as Four ±10 V outputs.
03 · Laboratory setpoint generationApply the documented four-channel bipolar voltage command output only after confirming resolution as 12-bit command conversion.
04 · Four-loop voltage output replacementApply the documented four-channel bipolar voltage command output only after confirming mechanical host as Compatible VersaMax carrier.

Why choose Nordwel

Catalog number traceabilityIC200ALG322 is reviewed against IC200ALG322.
Module family boundaryVersaMax modular I/O is checked independently.
Resolution control12-bit command conversion
Coordinated releaseTiffany manages evidence, quotation and exact catalog label, carrier identity, channel map, zero and span measurements, polarity test and load response.
Keep exact identity, mechanical host and final acceptance as separate decisions.
Need Tiffany to verify the IC200ALG322 evidence package?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp