other
Products
ISD280-1112 Infrared Optical Data Transmission Device
ISD280-1112 Infrared Optical Data Transmission Device
ISD280-1112 Infrared Optical Data Transmission Device

SICK ISD280-1112 Infrared Optical Data Transmission Device

EMAIL SALES
SICK official data reviewed
ISD280-1112 — Infrared Optical Data Transmission Device

An infrared optical data transmission device with a published 0.2–150 m operating path and 1.5 MBaud data rate.

SICK ISD280Bidirectional optical data transferExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerSICK
Documented familySICK ISD280
Product formInfrared Optical Data Transmission Device
Primary functionBidirectional optical data transfer
Part number1017047
Transmission distance0.2–150 m
Data rate1.5 MBaud
Light sourceInfrared LED, 860 nm
  • Brand:

    Others
  • Item NO.:

    ISD280-1112
  • Goods Stock:

    1
  • Part Number:

    ISD280-1112
  • Description:

    An infrared optical data transmission device with a published 0.2–150 m operating path and 1.5 MBaud data rate.
ISD280-1112 configuration inquiry

Get a precise quote for ISD280-1112

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

ISD280-1112 official identification

An infrared optical data transmission device with a published 0.2–150 m operating path and 1.5 MBaud data rate.

System roleBidirectional optical data transfer
Connection boundaryRS-422/RS-485 and PROFIBUS DP; 9-pin D-Sub plus 5-pin M12
Selection focusConfirm the optical distance, interface assignment, supply variant and connector pinout.
Release evidencePart number 1017047, alignment record, interface setting, optical-path test and received-data log

Engineering and installation checks

  • undefined
  • Align the paired optical axes across the measured 0.2–150 m path.
  • Manufacturer verification basis: SICK ISD280-1112 official data sheet.
Official product data

ISD280-1112 key specifications

Part number 1017047
Transmission distance 0.2–150 m
Data rate 1.5 MBaud
Light source Infrared LED, 860 nm
Interfaces RS-422 / RS-485 / PROFIBUS DP
Connection D-Sub 9-pin female; M12 5-pin
Supply without heating 24 V DC ±20%
Supply with heating 24 V DC +20/−5%
Protection IP54
Weight 1 kg

Source: SICK ISD280-1112 official data sheet.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of ISD280-1112.

  • Align the paired optical axes across the measured 0.2–150 m path.
  • Select the supply tolerance according to whether the heater circuit is used.
  • Keep the connector faces clean and verify both D-Sub and M12 pin assignments.
  • Prove bidirectional telegram transfer at the configured interface before service.
Record the as-found condition and the final part number 1017047, alignment record, interface setting, optical-path test and received-data log
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for ISD280-1112 before purchase approval.

Optical path
0.2–150 m
Line rate
1.5 MBaud
Protocol interface
RS-422, RS-485 or PROFIBUS DP
Optical wavelength
860 nm infrared
Enclosure requirement
IP54 within the site protection plan
Final selection: Use only the values published for ISD280-1112 in SICK ISD280-1112 official data sheet; site suitability remains an engineering decision.
Recommended model families

Related Industrial Models

SICK verified models 01Emerson 333UEmerson CE4001S2T1B1Emerson CE4001S2T2B7

Each target page displays Tiffany Guan and sales2@mooreplc.com.

SICK verified models 02Emerson CE4002S1T2B6Emerson CE4002S1T2B8Emerson CE4003S2B10

Each target page displays Tiffany Guan and sales2@mooreplc.com.

SICK verified models 03Emerson CE4003S2B9Emerson CE4031S2T2B6Emerson CE4032S1T2B8

Each target page displays Tiffany Guan and sales2@mooreplc.com.

SICK verified models 04Emerson CE4033S2B10Emerson CE4036P2Emerson CS6002

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01ABB AC522ABB AI563ABB AO522

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02ABB AO562ABB AO568ABB CD522

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03ABB CI504-PNIOABB CI506-PNIOABB CI541-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04ABB CI542-DPABB CI582-CNABB CI590-CS31-HA

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05ABB CI592-CS31ABB CM5640-2ETHABB CM579-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06ABB CM582-DPABB CM588-CNABB CM589-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07ABB CM597-ETHABB CM598-CNABB DC562

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08ABB DI572ABB DO526ABB DO571

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

ISD280-1112 Order Guide

Use the complete SICK designation and installed hardware record for engineering review.
1Ordering identityISD280-1112
2Official evidenceSICK ISD280-1112 official data sheet
3Installation surveySelect the supply tolerance according to whether the heater circuit is used.
4Compatibility gate0.2–150 m
5Commissioning recordPart number 1017047, alignment record, interface setting, optical-path test and received-data log
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact ISD280-1112 source record named on this page.
Interface reviewRS-422/RS-485 and PROFIBUS DP; 9-pin D-Sub plus 5-pin M12
Receiving checkConfirm the optical distance, interface assignment, supply variant and connector pinout.
Release packagePart number 1017047, alignment record, interface setting, optical-path test and received-data log

ISD280-1112 FAQ

Which part number value identifies the reviewed ISD280-1112 Infrared Optical Data Transmission Device configuration during optical aisle commissioning?

Part number is published as 1017047 for the SICK ISD280. For crane aisle data link, align the paired optical axes across the measured 0.2–150 m path. Log the comparison against the controlled parts list before the item enters the cabinet. Record checkpoint 1 in the optical aisle commissioning package.

Why does light source matter when selecting ISD280-1112 Infrared Optical Data Transmission Device during optical aisle commissioning?

The official ISD280-1112 record gives light source as Infrared LED, 860 nm for its infrared optical data transmission device function. For moving carriage communication, select the supply tolerance according to whether the heater circuit is used. Check the mating device, protective hardware and configured function before energization. Record checkpoint 2 in the optical aisle commissioning package.

Which mismatch involving supply without heating should stop approval of ISD280-1112 Infrared Optical Data Transmission Device during optical aisle commissioning?

For this bidirectional optical data transfer selection, supply without heating is 24 V DC ±20%. For contactless conveyor transfer, keep the connector faces clean and verify both D-Sub and M12 pin assignments. The purchase description must retain units, polarity, wiring form and option wording exactly where they are published. Record checkpoint 3 in the optical aisle commissioning package.

What maintenance record preserves the weight evidence for ISD280-1112 Infrared Optical Data Transmission Device during optical aisle commissioning?

Use 1 kg as the controlled weight value in the SICK ISD280 review. For long-path warehouse signalling, prove bidirectional telegram transfer at the configured interface before service. Use a calibrated observation where measurement is possible and attach the result to receiving inspection. Record checkpoint 4 in the optical aisle commissioning package.

How does protocol interface limit a proposed ISD280-1112 Infrared Optical Data Transmission Device substitute during optical aisle commissioning?

Protocol interface is published as RS-422, RS-485 or PROFIBUS DP for the SICK ISD280. For crane aisle data link, align the paired optical axes across the measured 0.2–150 m path. Record the complete marking in focus; cropped labels are not sufficient for exact-order approval. Record checkpoint 5 in the optical aisle commissioning package.

How can a technician test ISD280-1112 Infrared Optical Data Transmission Device without exceeding the stated part number during optical aisle commissioning?

The official ISD280-1112 record gives part number as 1017047 for its infrared optical data transmission device function. For moving carriage communication, select the supply tolerance according to whether the heater circuit is used. Test at a safe initial condition, then progress to the operating point defined by the approved procedure. Record checkpoint 6 in the optical aisle commissioning package.

When can the ISD280-1112 Infrared Optical Data Transmission Device light source entry be released for quotation during optical aisle commissioning?

For this bidirectional optical data transfer selection, light source is Infrared LED, 860 nm. For contactless conveyor transfer, keep the connector faces clean and verify both D-Sub and M12 pin assignments. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim. Record checkpoint 7 in the optical aisle commissioning package.

How should engineers verify supply without heating before fitting ISD280-1112 Infrared Optical Data Transmission Device during optical aisle commissioning?

Use 24 V DC ±20% as the controlled supply without heating value in the SICK ISD280 review. For long-path warehouse signalling, prove bidirectional telegram transfer at the configured interface before service. Release is appropriate only when the manufacturer value and the project requirement agree. Record checkpoint 8 in the optical aisle commissioning package.

What installation decision is controlled by weight on ISD280-1112 Infrared Optical Data Transmission Device during optical aisle commissioning?

Weight is published as 1 kg for the SICK ISD280. For crane aisle data link, align the paired optical axes across the measured 0.2–150 m path. A substitution review must close functional, mechanical, electrical and environmental differences independently. Record checkpoint 9 in the optical aisle commissioning package.

What commissioning check confirms the documented protocol interface for ISD280-1112 Infrared Optical Data Transmission Device during optical aisle commissioning?

The official ISD280-1112 record gives protocol interface as RS-422, RS-485 or PROFIBUS DP for its infrared optical data transmission device function. For moving carriage communication, select the supply tolerance according to whether the heater circuit is used. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed. Record checkpoint 10 in the optical aisle commissioning package.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
SICK ISD280 application review

ISD280-1112 Applications

These contexts use the manufacturer-documented function of ISD280-1112; each requires a separate site-fit decision.

Application contexts

01 · Crane aisle data linkApply the documented bidirectional optical data transfer only after confirming optical path as 0.2–150 m.
02 · Moving carriage communicationApply the documented bidirectional optical data transfer only after confirming line rate as 1.5 MBaud.
03 · Contactless conveyor transferApply the documented bidirectional optical data transfer only after confirming protocol interface as RS-422, RS-485 or PROFIBUS DP.
04 · Long-path warehouse signallingApply the documented bidirectional optical data transfer only after confirming optical wavelength as 860 nm infrared.

Why choose Nordwel

Traceable identityISD280-1112 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to bidirectional optical data transfer, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain ISD280-1112, RS-422/RS-485 and PROFIBUS DP; 9-pin D-Sub plus 5-pin M12, and the approved site record as three independent checks.
Need help matching this SICK configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp