other
Products
KGK-402M Automatic Grease Metering Valve
KGK-402M Automatic Grease Metering Valve
KGK-402M Automatic Grease Metering Valve

Yamada KGK-402M Automatic Grease Metering Valve

EMAIL SALES
Yamada official data reviewed
KGK-402M — Automatic Grease Metering Valve

A metal-seal automatic grease metering valve with 0.2–1 mL adjustment and 20 MPa maximum material pressure.

Yamada KGK-400M SeriesFixed-volume automatic grease deliveryExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerYamada
Documented familyYamada KGK-400M Series
Product formAutomatic Grease Metering Valve
Primary functionFixed-volume automatic grease delivery
Product number686406
Metered range0.2–1 mL
Capacity1 mL
Maximum material pressure20 MPa
  • Brand:

    Others
  • Item NO.:

    KGK-402M
  • Goods Stock:

    1
  • Part Number:

    KGK-402M
  • Description:

    A metal-seal automatic grease metering valve with 0.2–1 mL adjustment and 20 MPa maximum material pressure.
KGK-402M configuration inquiry

Get a precise quote for KGK-402M

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

KGK-402M official identification

A metal-seal automatic grease metering valve with 0.2–1 mL adjustment and 20 MPa maximum material pressure.

System roleFixed-volume automatic grease delivery
Connection boundaryRc1/4 air and material ports
Selection focusMatch the 0.2–1 mL delivery range, Rc1/4 ports, pressure limits and room-temperature application.
Release evidenceProduct number 686406, adjustment setting, material-pressure reading and measured discharge volume

Engineering and installation checks

  • undefined
  • Connect the air and material lines only to their designated Rc1/4 ports.
  • Manufacturer verification basis: Yamada KGK-400M Series official product specifications.
Official product data

KGK-402M key specifications

Product number 686406
Metered range 0.2–1 mL
Capacity 1 mL
Maximum material pressure 20 MPa
Pressure resistance 30 MPa
Maximum air pressure 0.7 MPa
Recommended air pressure 0.4–0.5 MPa
Port size Rc1/4
Seal construction NBR packing / metal seal
Weight 2.5 kg

Source: Yamada KGK-400M Series official product specifications.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of KGK-402M.

  • Connect the air and material lines only to their designated Rc1/4 ports.
  • Set supply air within the recommended 0.4–0.5 MPa range.
  • Keep material pressure at or below 20 MPa during operation.
  • Measure several discharge cycles after adjustment to verify the selected volume.
Record the as-found condition and the final product number 686406, adjustment setting, material-pressure reading and measured discharge volume
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for KGK-402M before purchase approval.

Dispense volume
0.2–1 mL
Lubricant service
Grease metering
Material pressure
20 MPa maximum
Air control
0.7 MPa maximum
Ambient use
Room-temperature installation
Final selection: Use only the values published for KGK-402M in Yamada KGK-400M Series official product specifications; site suitability remains an engineering decision.
Recommended model families

Related Industrial Models

Yamada verified models 01Emerson CE4003S2B10Emerson CE4003S2B9Emerson CE4031S2T2B6

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Yamada verified models 02Emerson CE4032S1T2B8Emerson CE4033S2B10Emerson CE4036P2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Yamada verified models 03Emerson CS6002ABB AC522ABB AI563

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Yamada verified models 04ABB AO522ABB AO562ABB AO568

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01ABB CM582-DPABB CM588-CNABB CM589-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02ABB CM597-ETHABB CM598-CNABB DC562

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03ABB DI572ABB DO526ABB DO571

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04Emerson 333UEmerson CE4001S2T1B1Emerson CE4001S2T2B7

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05Emerson CE4002S1T2B6Emerson CE4002S1T2B8ABB CD522

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06ABB CI504-PNIOABB CI506-PNIOABB CI541-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07ABB CI542-DPABB CI582-CNABB CI590-CS31-HA

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08ABB CI592-CS31ABB CM5640-2ETHABB CM579-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

KGK-402M Order Guide

Use the complete Yamada designation and installed hardware record for engineering review.
1Ordering identityKGK-402M
2Official evidenceYamada KGK-400M Series official product specifications
3Installation surveySet supply air within the recommended 0.4–0.5 MPa range.
4Compatibility gate0.2–1 mL
5Commissioning recordProduct number 686406, adjustment setting, material-pressure reading and measured discharge volume
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact KGK-402M source record named on this page.
Interface reviewRc1/4 air and material ports
Receiving checkMatch the 0.2–1 mL delivery range, Rc1/4 ports, pressure limits and room-temperature application.
Release packageProduct number 686406, adjustment setting, material-pressure reading and measured discharge volume

KGK-402M FAQ

How can a technician test KGK-402M Automatic Grease Metering Valve without exceeding the stated maximum air pressure during grease-dose calibration?

The official KGK-402M record gives maximum air pressure as 0.7 MPa for its automatic grease metering valve function. For centralized grease dosing, connect the air and material lines only to their designated Rc1/4 ports. Test at a safe initial condition, then progress to the operating point defined by the approved procedure. Record checkpoint 1 in the grease-dose calibration package.

When can the KGK-402M Automatic Grease Metering Valve seal construction entry be released for quotation during grease-dose calibration?

For this fixed-volume automatic grease delivery selection, seal construction is NBR packing / metal seal. For bearing lubrication point, set supply air within the recommended 0.4–0.5 MPa range. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim. Record checkpoint 2 in the grease-dose calibration package.

How should engineers verify lubricant service before fitting KGK-402M Automatic Grease Metering Valve during grease-dose calibration?

Use Grease metering as the controlled lubricant service value in the Yamada KGK-400M Series review. For machine-slide metering, keep material pressure at or below 20 MPa during operation. Release is appropriate only when the manufacturer value and the project requirement agree. Record checkpoint 3 in the grease-dose calibration package.

What installation decision is controlled by ambient use on KGK-402M Automatic Grease Metering Valve during grease-dose calibration?

Ambient use is published as Room-temperature installation for the Yamada KGK-400M Series. For repeatable maintenance dispensing, measure several discharge cycles after adjustment to verify the selected volume. A substitution review must close functional, mechanical, electrical and environmental differences independently. Record checkpoint 4 in the grease-dose calibration package.

What commissioning check confirms the documented capacity for KGK-402M Automatic Grease Metering Valve during grease-dose calibration?

The official KGK-402M record gives capacity as 1 mL for its automatic grease metering valve function. For centralized grease dosing, connect the air and material lines only to their designated Rc1/4 ports. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed. Record checkpoint 5 in the grease-dose calibration package.

At which review gate should KGK-402M Automatic Grease Metering Valve maximum air pressure be challenged during grease-dose calibration?

For this fixed-volume automatic grease delivery selection, maximum air pressure is 0.7 MPa. For bearing lubrication point, set supply air within the recommended 0.4–0.5 MPa range. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence. Record checkpoint 6 in the grease-dose calibration package.

Which drawing or schedule should carry the KGK-402M Automatic Grease Metering Valve seal construction record during grease-dose calibration?

Use NBR packing / metal seal as the controlled seal construction value in the Yamada KGK-400M Series review. For machine-slide metering, keep material pressure at or below 20 MPa during operation. Mark the evidence source and revision so future reviewers can reproduce the decision. Record checkpoint 7 in the grease-dose calibration package.

Which companion item must agree with lubricant service for KGK-402M Automatic Grease Metering Valve during grease-dose calibration?

Lubricant service is published as Grease metering for the Yamada KGK-400M Series. For repeatable maintenance dispensing, measure several discharge cycles after adjustment to verify the selected volume. Any mismatch requires an engineering disposition rather than an undocumented field adaptation. Record checkpoint 8 in the grease-dose calibration package.

How should a discrepancy in ambient use be closed for KGK-402M Automatic Grease Metering Valve during grease-dose calibration?

The official KGK-402M record gives ambient use as Room-temperature installation for its automatic grease metering valve function. For centralized grease dosing, connect the air and material lines only to their designated Rc1/4 ports. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request. Record checkpoint 9 in the grease-dose calibration package.

What receiving evidence is required for the capacity stated for KGK-402M Automatic Grease Metering Valve during grease-dose calibration?

For this fixed-volume automatic grease delivery selection, capacity is 1 mL. For bearing lubrication point, set supply air within the recommended 0.4–0.5 MPa range. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification. Record checkpoint 10 in the grease-dose calibration package.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Yamada KGK-400M Series application review

KGK-402M Applications

These contexts use the manufacturer-documented function of KGK-402M; each requires a separate site-fit decision.

Application contexts

01 · Centralized grease dosingApply the documented fixed-volume automatic grease delivery only after confirming dispense volume as 0.2–1 mL.
02 · Bearing lubrication pointApply the documented fixed-volume automatic grease delivery only after confirming lubricant service as Grease metering.
03 · Machine-slide meteringApply the documented fixed-volume automatic grease delivery only after confirming material pressure as 20 MPa maximum.
04 · Repeatable maintenance dispensingApply the documented fixed-volume automatic grease delivery only after confirming air control as 0.7 MPa maximum.

Why choose Nordwel

Traceable identityKGK-402M remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to fixed-volume automatic grease delivery, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain KGK-402M, Rc1/4 air and material ports, and the approved site record as three independent checks.
Need help matching this Yamada configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp