A fail-safe CPU 1214FC with fourteen 24 V DC inputs, ten 24 V DC transistor outputs, two 0–10 V analog inputs and 200 KB program/data memory. Its documented supply range is 20.4–28.8 V DC.
Brand:
SIEMENSItem NO.:
6ES7214-1AF40-0XB0Order(MOQ):
1Payment:
T/TLead Time：
1-3 daysPart Number:
6ES7214-1AF40-0XB0Weight:
See exact Siemens data sheetDimensions:
See exact Siemens data sheetCertification:
Official manufacturer documentation verifiedDescription:
A fail-safe CPU 1214FC with fourteen 24 V DC inputs, ten 24 V DC transistor outputs, two 0–10 V analog inputs and 200 KB program/data memory.Siemens identifies 6ES7214-1AF40-0XB0 as CPU 1214FC fail-safe compact controller, DC/DC/DC. A fail-safe CPU 1214FC with fourteen 24 V DC inputs, ten 24 V DC transistor outputs, two 0–10 V analog inputs and 200 KB program/data memory.
Published exact-model pages for project comparison.
Published exact-model pages for project comparison.
Published exact-model pages for project comparison.
Published exact-model pages for project comparison.
Selected ABB control, I/O and measurement products already published on Nordwel.
Selected Honeywell controller, IOTA and Safety Manager products published on Nordwel.
Selected GE turbine-control, communication and I/O products published on Nordwel.
Square D belongs to Schneider Electric; these linked Schneider products are already published on Nordwel.
Selected SST, Woodhead and Molex communication-interface products published on Nordwel.
Selected Vibro-Meter proximity and vibration sensor products published on Nordwel.
Selected VIPA CPU and controller products already published on Nordwel.
Selected Westinghouse Ovation processor, analog-input and I/O interface products published on Nordwel.
Use the exact manufacturer order number and verify the system constraints before procurement.
Specify 6ES7214-1AF40-0XB0 exactly.
Preserve the safety program, signature and hardware configuration.
Check CPU, sensor and expansion loads against official current limits.
Verify 14 DI, 10 DO and 2 AI match the approved drawings.
Confirm firmware V4.7 and STEP 7 V20 or higher requirements.
Revalidate every affected safety function after replacement.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Auxiliary relay option for protection and control applications.
Recent Middle East inquiryIndustrial PROFIBUS fiber-optic communication module.
Recent Middle East inquiryRemote I/O gateway for demanding process-system environments.
Specialist brandReplacement inverter driver board for installed industrial systems.
Specialist brandAmplifier transducer for load-cell signal conditioning.
Specialist brandIndustrial power-supply model for legacy equipment support.
Specialist brandAnswers below use Siemens official product documentation for this exact order number.
A Siemens CPU 1214FC fail-safe compact controller.
24 V DC, with a permissible range of 20.4–28.8 V.
Fourteen 24 V DC inputs.
Ten 24 V DC transistor outputs.
Yes, two 0–10 V DC inputs.
200 KB program/data memory and 4 MB load memory.
Firmware V4.7 with STEP 7 V20 or higher.
Yes. The affected safety functions require the prescribed acceptance testing.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
TOp 1
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
