other
Products
X20CP1584 Industrial controller product view
X20CP1584 Industrial controller product view
X20CP1584 Industrial controller product view

B&R X20CP1584 X20 Atom 600 MHz Controller

EMAIL SALES
B&R official data reviewed
X20CP1584 — Industrial controller

A fanless X20 controller built around a 600 MHz Intel Atom processor with Ethernet, POWERLINK, USB, RS232 and X2X Link interfaces.

X20 controller familyMachine control with integrated networkingExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Product familyX20 controller family
Exact modelX20CP1584
Verified functionMachine control with integrated networking
Interface boundaryOne modular interface slot plus onboard communication ports
Memory256 MB DDR2 SDRAM
Selection basisConfirm application memory, interface module, firmware and network topology.
  • Brand:

    Others
  • Item NO.:

    X20CP1584
  • Goods Stock:

    1
  • Part Number:

    X20CP1584
  • Description:

    A fanless X20 controller built around a 600 MHz Intel Atom processor with Ethernet, POWERLINK, USB, RS232 and X2X Link interfaces.
X20CP1584 configuration inquiry

Get a precise quote for X20CP1584

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

X20CP1584 official identification

A fanless X20 controller built around a 600 MHz Intel Atom processor with Ethernet, POWERLINK, USB, RS232 and X2X Link interfaces.

System responsibilityMachine control with integrated networking
Connection envelopeOne modular interface slot plus onboard communication ports
Procurement decisionConfirm application memory, interface module, firmware and network topology.
Acceptance recordExact label, installed hardware record and functional test results for X20CP1584.

Engineering and installation checks

  • Use X20CP1584 as the controlling receiving and quotation identity.
  • Check the installed design against one modular interface slot plus onboard communication ports.
  • Release the unit only after confirming machine control with integrated networking in the intended assembly.
Official product data

X20CP1584 key specifications

Material number X20CP1584
Processor Intel Atom, 600 MHz
Memory 256 MB DDR2 SDRAM
Interfaces RS232, Ethernet, POWERLINK, 2× USB, X2X Link
Interface slots 1
Cooling Fanless
Power consumption 8.6 W without interface module and USB
Weight 400 g

Source: B&R official X20CP1584 product data.

Pre-order check 01

Installation environment

Prepare the installation record for X20CP1584 before field work begins.

  • Record the complete X20CP1584 nameplate before removal or installation.
  • Verify one modular interface slot plus onboard communication ports against the approved wiring or system drawing.
  • Confirm the required carrier, terminal, host or interface hardware before energization.
  • Complete a point-by-point or function-by-function acceptance test for machine control with integrated networking.
Keep the full ordering code, wiring record and acceptance result together.
Pre-order check 02

Compatibility confirmation

Approve the item only when every published boundary agrees with the installed design.

Exact identity
X20CP1584
Product family
X20 controller family
Functional boundary
Machine control with integrated networking
Installation boundary
One modular interface slot plus onboard communication ports
Memory
256 MB DDR2 SDRAM
Final selection: retain the exact X20CP1584 identity and confirm installation suitability against the approved engineering record.
Recommended model families

More B&R models

B&R verified models 01B&R 8BVI0220HWD0.000-1B&R 8LSA44.EA030D000-3B&R 3IF782.9

Each target page carries the approved Tiffany Guan contact details.

B&R verified models 02B&R 7CP430.60-1B&R 8EI8X8HWS10.0500-1B&R 5ACPCI.MFIO-K01

Each target page carries the approved Tiffany Guan contact details.

B&R verified models 03B&R X20CSL8100B&R X20AP3111B&R X20IF1063-1

Each target page carries the approved Tiffany Guan contact details.

B&R verified models 04B&R X20DS1319B&R 8BVI0330HWS0.000-1B&R 8B0C0320HW00.000-1

Each target page carries the approved Tiffany Guan contact details.

Need help matching an installed unit?CHECK WITH SALES
Additional published brands

Additional Advantage Models

Tiffany verified targets 01Siemens 6ES5305-7LA11Siemens 6ES7551-1AB00-0AB0Siemens 6ES7553-1AA00-0AB0

Each target page carries the approved Tiffany Guan contact details.

Tiffany verified targets 02Yokogawa ATSS3D-0Siemens 6ES7357-4AH01-0AE0Siemens 6ES7400-2JA10-0AA1

Each target page carries the approved Tiffany Guan contact details.

Tiffany verified targets 03Siemens 6ES7414-2XG02-0AB0Siemens 6ES7416-2XL01-0AB0Siemens 6ES7425-2AD00-0AA0

Each target page carries the approved Tiffany Guan contact details.

Tiffany verified targets 04Siemens 6ES7515-2AN03-0AB0Siemens 6ES7517-3UP00-0AB0Siemens 6ES7518-4UP00-0AB0

Each target page carries the approved Tiffany Guan contact details.

Tiffany verified targets 05B&R 8BVI0330HWS0.000-1B&R X20IF2181-2B&R 8B0C0320HW00.000-1

Each target page carries the approved Tiffany Guan contact details.

Tiffany verified targets 06Siemens 7MH4900-3AA01Siemens 6GK1161-6AA02Siemens 6FC5370-5AA20-0AA0

Each target page carries the approved Tiffany Guan contact details.

Tiffany verified targets 07Siemens 6SL3120-1TE15-0AA4Siemens 6SL3040-0LA00-0AA1Siemens 6ES7157-0AA82-0XA0

Each target page carries the approved Tiffany Guan contact details.

Tiffany verified targets 08Siemens 6SL3352-3AG38-8AA0Siemens 6ES7407-0RA01-0AA0Siemens 6AG1155-6AU01-7BN0

Each target page carries the approved Tiffany Guan contact details.

Send the complete model and nameplate for exact-order review.CHECK WITH SALES

X20CP1584 Order Guide

Use the complete B&R designation and installed hardware record for engineering review.

1Ordering identityX20CP1584
2Published functionMachine control with integrated networking
3Installed-condition captureOne modular interface slot plus onboard communication ports
4Hardware fitConfirm application memory, interface module, firmware and network topology.
5Commissioning proofRecord functional test results for fanless cabinet CPU replacement.
6Release packageNameplate, wiring or host record, inspection result and approval.

Middle East Demand & Specialist Models

Selected verified product pages for regional replacement and project inquiries.

Target pages display Tiffany Guan contact details.
Confirm the exact part number before ordering.
ABB / ENGINEERING CROSS-CHECKCD522

Retain the exact suffixes when preparing the project procurement record.

Tiffany-verified target
ABB / REPLACEMENT REVIEWCI541-DP

Check the linked model against drawings and the as-built equipment register.

Tiffany-verified target
ABB / PROJECT MATCHCI542-DP

Record the target-page identity in the receiving inspection package.

Tiffany-verified target
ABB / ORDER-CODE CHECKCI592-CS31

Treat nearby family codes as alternatives only after an engineering check.

Tiffany-verified target
ABB / MAINTENANCE REFERENCECM5640-2ETH

Use Tiffany contact details on the linked page for order clarification.

Tiffany-verified target
ABB / COMPATIBILITY REVIEWCM582-DP

Verify quantity, site context and delivery requirements in one inquiry.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Support for exact-code review, sourcing, receiving and controlled release of X20CP1584.

Support scope

Memory256 MB DDR2 SDRAM
Functional scopeMachine control with integrated networking
Installation boundaryOne modular interface slot plus onboard communication ports
Acceptance packageExact label, installed hardware record and functional test result

X20CP1584 FAQ

Which cabinet or machine record should reference X20CP1584?

The bill of materials, I/O or network schedule, wiring drawing and commissioning sheet should all use the exact X20CP1584 identity for fanless cabinet CPU replacement.

How is the published material number value used during acceptance for X20CP1584?

Verify X20CP1584 against the received unit and the installed design. It is a selection boundary and must be confirmed together with the complete model and mating hardware.

What should be checked before energizing X20CP1584?

Confirm the exact label, protective measures, supply or signal boundary, terminals and configured function. Energize only after the point-to-point review supports machine control with integrated networking.

What receiving evidence confirms X20CP1584 for single-interface-slot retrofit?

Use the complete X20CP1584 label, the approved purchase description and the installed-system record. The controlled published value for memory is 256 MB DDR2 SDRAM; any mismatch requires hold-and-review before installation.

How should engineers verify interfaces before wiring X20CP1584?

Treat RS232, Ethernet, POWERLINK, 2× USB, X2X Link as the documented interfaces boundary. Compare it with the field drawing, terminal plan and measured supply or interface condition before conductors are landed.

Which compatibility item is most important when replacing X20CP1584 in compact machine controller?

Confirm one modular interface slot plus onboard communication ports, then verify the carrier, terminal, host or interface hardware. A matching housing alone does not establish functional compatibility.

What commissioning result demonstrates the intended function of X20CP1584?

Commission the installed channel, output, controller or display function against an approved test case for machine control with integrated networking. Record the expected state, observed state and acceptance decision.

Can X20CP1584 be selected from its family name alone?

No. Keep X20CP1584 as the purchasing identity and use X20 controller family only as system context. The full order code must match the quotation, received label and maintenance record.

How should a technician document X20CP1584 during a controlled replacement?

Photograph the original and replacement labels, record mating hardware and wiring positions, and attach the functional test result. Keep the weight value of 400 g in the inspection record.

What installation mistake should be avoided with X20CP1584?

Do not assume adjacent family members share the same wiring or interface limits. Confirm one modular interface slot plus onboard communication ports and isolate the circuit before changing connections.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
X20 controller family application review

X20CP1584 Applications

Each application below requires its own installed-system evidence and exact-model confirmation.

Application contexts

01 · compact machine controllerApply machine control with integrated networking only after confirming weight as 400 g.
02 · POWERLINK control nodeApply machine control with integrated networking only after confirming material number as X20CP1584.
03 · single-interface-slot retrofitApply machine control with integrated networking only after confirming processor as Intel Atom, 600 MHz.
04 · fanless cabinet CPU replacementApply machine control with integrated networking only after confirming memory as 256 MB DDR2 SDRAM.

Why choose Nordwel

Exact identity controlX20CP1584 remains the sole purchasing identity.
Published boundary reviewOne modular interface slot plus onboard communication ports is checked independently.
Memory traceability256 MB DDR2 SDRAM
Coordinated releaseTiffany manages quotation, receiving evidence and acceptance records.
Keep exact identity, interface fit and final acceptance as separate decisions for X20CP1584.
Need Tiffany to verify the X20CP1584 evidence package?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp